|
Part No: |
1.286- |
|
Power Supply: |
420 Volt 3Ph |
|
Water Flow Rate: |
1000 Litres/hour |
|
Operating Pressure: |
250 Bar |
|
Maximum Pressure: |
275 Bar |
|
Max Water Feed Temperature: |
60°C |
|
Connected Load: |
9.2kW |
|
Weight: |
63.0 Kg |
|
Dimensions: |
560 x 500 x 1090mm |
Karcher HD 10/25-4S (420V) Cold Water Pressure Washer
£ 1136.40 Ex. VAT
Features & Benefits
Suitable Applications
Description
|
|
Agriculture
|
|
|
Hire/Fleet
|
|
|
Automotive
|
|
|
Workshops
|
|
|
Construction
|
|
|
Industrial Cleaning Contractors
|
The three-phase HD 10/25-4S cold water high-pressure cleaner is user friendly and offers an operating pressure of 250 bar at a maximum throughput rate of 1000 l/h.
Thanks to its upright construction, the Karcher HD 10/25-4S takes up less space than a conventional machine and is much easier to manoeuvre, especially up and down steps and stairs. Its large diameter, rubber-tyred wheels ensure maximum mobility even in difficult terrain. The push handle adjusts to the most comfortable height for the user. Accessories that are not in use can be kept safely in a separate nozzle compartment.
The easy-press trigger gun offers a high degree of user comfort since it requires less effort to hold and operate and features a servopress controller for convenient adjustment of pressure and water flow rate. The spray lance can be pivoted through 360° while operating at full pressure. Other features are the pressure switch control, which turns off the pump as soon as the trigger is released and thus extends the service life of the motor and pump, and the electronic monitoring system for the motor and pump unit. The built-in detergent tank has a capacity of 6 litres.
The Karcher HD 10/25-4S has been designed for tough daily operating conditions. The chemical-resistant brass cylinder head and stainless steel pistons with ceramic sleeves are combined with an efficient air-water cooling system to guarantee a long service
Thanks to its upright construction, the Karcher HD 10/25-
The easy-
The Karcher HD 10/25-
Standard Accessories
|
|
0°/25°/40° triple nozzle with touchless changeover.
|
|
|
6-
|
|
|
Brass cylinder head with stainless steel inlet and pressure valves and safety valve High grade materials for a long service life, machine is protected against overload
|
|
|
Electronic motor protection system with LED display Leakage, over/undervoltage and other operating conditions are monitored and indicated and the machine is shut down automatically in the event of a fault.
|
|
|
Endurance tested, 4-
|
|
|
Oil inspection glass in machine cover Pump oil level can be checked quickly and easily
|
|
|
Trigger gun, Easy Press
|
|
|
Trigger gun with soft grip
|
|
|
High-
|
|
|
Spray lance, 1050 mm
|
|
|
Triple nozzle/Power nozzle, : touchless changeover
|
|
|
Anti-
|
|
|
Large fine mesh water filter
|
|
|
Servo-
|
|
|
Brass water inlet fitting
|